The success story continues! We've equipped the AT3.4 "V2" with several new features that take the vehicle to the next level of evolution.

Some technical changes have been implemented in our 1:10 scale truggy - among other things, the vehicle now comes with LED lighting on the roof


NEW* 80A brushed controller with T-connector and 540 motor
NEW* Programmable speed controller
NEW* 15kg steering servo with metal gear
NEW* LED lighting
NEW* Many attachments already mounted
NEW* even more tuning parts available


The new 80A brushed speed controller is waterproof, programmable, and pre-configured with a T-connector. To fully utilize the vehicle's potential, we recommend using a 2S LiPo battery. Additionally, a separately available programming card (item no. 2110061) can be used to set various parameters such as braking force, punch, low-voltage protection, and much more.


The car is powered by a 540 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Thanks to the higher performance of the speed controller and the use of T-connectors, any 2S LiPo battery can be used – regardless of C-rate and capacity.

Four oil-pressure shock absorbers provide ideal handling, ensuring plenty of driving pleasure. A servo with 15 kg of force and metal gears implements the steering commands.


A lightweight and compact design, as well as a comfortable and ergonomic shape – these are just two of the features of our CR4S 4-channel remote control. Of course, all trim, reverse, and dual rate functions are accessible in the cockpit, allowing adjustments to be made easily using levers and knobs. The remote control also features a "Beginner Mode" (speed reduction by 50%), making it ideal for pilots who aren't yet experienced with these types of RC vehicles.


4WD all-wheel drive
2.4 GHz 4-channel radio system
80A brushed speed controller with T-connector
540 15T engine with 32,000 rpm @ 7.4V
15kg steering servo with metal gear (25T, ball bearing)
4 oil shock absorbers
Ball bearing main drive
Extremely durable plastic parts made of composite material
Steel differential outputs
Aluminum main drive shaft with steel mounts
Adjustable upper tie rods
5mm aluminum motor mount
6mm damper towers
2 differentials (front/rear)
Stylish truggy body with plastic attachments
"Light-Weight" chassis (less weight - longer driving time)
Many aluminum tuning parts available

Scale 1:10
Dimensions (L/W/H): 405x325x165 mm
Weight: 1740g
Wheelbase: 270mm
Ground clearance: approx. 35mm
Track width: 270mm front/rear
Wheels front/rear: Ø 105mm / Width: 55mm
Shock absorber oil: 400CPS
Installation length of the shock absorbers: 90mm
Motor gear ratio: Pinion: 18Z / Main gear: 64Z (module 0.6)

Inside the Box:
1/10 Truggy "AT3.4V2" RTR
2.4GHz "CR4S" remote control
Sticker sheet
Operating instructions

Recommended (not inside the box):

4x AA batteries for remote control
7.2V NiMH or 7.4V* LiPo driving battery (*recommended)
Charger (suitable for the drive battery)
Programming card for individual settings of the speed controller